It is summer time now, so I am not good about staying in routines. I think this probably helps balance out the rest of the year when I am scheduled every second of every day. At least this is what I say to myself to justify my lack of direction, lack of discipline, and general laziness these days. Riiiiight.
I have been in the studio working some (even though I have not been good about updating my blog). The soup mugs that I made as a special request have been glaze fired and much to my surprise, the "red" glaze ended up being a very nice shade of brown. NOT what we were looking for at all. So I'm going to send them through another glaze fire to see if the color will change. If not, oh well. That's how it goes sometimes.
I've thrown a possible replacement for the cannister lid that self destructed the other week. We shall see if it will fit after it is bisque fired. Getting the size right is tricky when one of the pieces has already dried and fired once.
I've also made a number of other mugs. I had someone ask about what mugs I had for sale not long ago and I realized that I really didn't have much. So three sets of 4 mugs later, I will have some to look at! (Well more like 2 sets of 4 and one set of 3 since I managed to poke a hole in the bottom of one....can we say too thin on the bottom?) I'm experimenting with a new mug shape and continue to work on pulling handles. The shape of a pulled handle I think works better with the new mug shape. My husband Jeff stopped by one day while I was working on some of them and commented that the 3 mugs I had lined up looked like 3 Mile Island. Those of you who are old enough to know what this means can now visualize what these mugs look like.
In other news, I am happy to report that I continue to not drive my car into the kiln that is sitting in my garage. This is a good thing but I worry every time I park the car. I still really want to use my new wheel. If I get the guts to do it, I might just bring some clay home and do a little throwing here at the house. A concern over the lack of pounding board (in other words, no place to work up clay) is causing me to pause. Well, that and the fact that there is so much other work to do here. It works so much better for me to go someplace else. I am so easily distracted here. There's the yard, the garden, the dog, the cats, the horses all clamoring for my attention when I am here. Ok, so the dog mostly just sleeps nearby, but there is always tons that needs doing here. Yes, I need to leave so that I can focus on pottery.
That reminds me. I need to go let the horses out. They've probably finished their breakfast by now!
You can often find me here
Friday, May 27, 2011
Friday, May 6, 2011
Disaster!
Sometimes bad things happen even when you are careful. The lid on the largest of the 3 cannisters that I made a while back self destructed while I was getting it ready to glaze last night.
I must not have attached the handle on the top of that lid very well. I had just dipped the lid in hot wax to coat the bottom edge (to keep glaze off the part that would be in contact with the shelf in the kiln when it is fired) and was holding it over the wax to drip when it let go. SPLASH! Into the wax went the lid. It didn't break when it fell which is a good thing, but wax went everywhere.
Sometimes things just don't go the way I plan. My first reaction is still to trash the offending piece, but I am learning (with Allen's help) to salvage things. It is difficult to think about throwing away a piece that already has so many hours of time invested in it.
So I now must go to plan B on that cannister set. First of all, the "broken" lid will need to be re-bisqued to remove the wax from the places I didn't want it. Then I'll probably have to fire the handle separate from the lid and try to re-attach it afterward. This also means that I need to do something different with the glaze than I originally planned. I have some time to consider that since I won't be glazing this until after the next bisque fire.
*SIGH*
Perhaps tomorrow will be a better day.
I must not have attached the handle on the top of that lid very well. I had just dipped the lid in hot wax to coat the bottom edge (to keep glaze off the part that would be in contact with the shelf in the kiln when it is fired) and was holding it over the wax to drip when it let go. SPLASH! Into the wax went the lid. It didn't break when it fell which is a good thing, but wax went everywhere.
Sometimes things just don't go the way I plan. My first reaction is still to trash the offending piece, but I am learning (with Allen's help) to salvage things. It is difficult to think about throwing away a piece that already has so many hours of time invested in it.
So I now must go to plan B on that cannister set. First of all, the "broken" lid will need to be re-bisqued to remove the wax from the places I didn't want it. Then I'll probably have to fire the handle separate from the lid and try to re-attach it afterward. This also means that I need to do something different with the glaze than I originally planned. I have some time to consider that since I won't be glazing this until after the next bisque fire.
*SIGH*
Perhaps tomorrow will be a better day.
Sunday, May 1, 2011
Beautiful Weekend
This weekend was just about perfect. Saturday was a good day to be in uptown Shelby. With the Arts on the Square, the opening day of the Foothills Farmers Market, and the Merry Go Round Festival all happening, there were lots of people around.
I threw eight mugs in the morning and then let them sit for a while I strolled the court square. Jeff and I visited with friends, admired some cool artwork, and ate some really good hot dogs. Because the weather was so nice, by the time we got back to the studio, the mugs were dry enough to attach handles. It isn't often that I can get 8 mugs done start to finish in the same day.
I threw eight mugs in the morning and then let them sit for a while I strolled the court square. Jeff and I visited with friends, admired some cool artwork, and ate some really good hot dogs. Because the weather was so nice, by the time we got back to the studio, the mugs were dry enough to attach handles. It isn't often that I can get 8 mugs done start to finish in the same day.
Sunday, April 24, 2011
Large Pressed Form Vase
This week's project is a special order for a large vase. To get the size that I want, I am assembling this vase in three pieces.
On the left in the picture above is the top of the vase. This part was thrown. The other two pieces, the center and bottom of the vase, are pressed forms. To make a pressed form, I roll out a large slab, add texture, and then cut the slab into smaller pieces. These small pieces are then pressed in to the form and allowed to dry. I allow the seams to show and become part of the design. Once all parts are leather hard, they are joined. Handles are added last. The assembled piece is pictured below.
On the left in the picture above is the top of the vase. This part was thrown. The other two pieces, the center and bottom of the vase, are pressed forms. To make a pressed form, I roll out a large slab, add texture, and then cut the slab into smaller pieces. These small pieces are then pressed in to the form and allowed to dry. I allow the seams to show and become part of the design. Once all parts are leather hard, they are joined. Handles are added last. The assembled piece is pictured below.
The handles on this vase are pulled rather than cut from a slab, created from a coil, or extruded like I have done in the past. Today was the first day that I have ever had any success pulling handles, and I am pleased to have managed to get two handles that match relatively well.
Back in the Swing
It's always hard for me to get back into making pottery after I've had to take time off. The problem with being a weekend potter is that anything that takes up time on weekends takes time away from pottery. Earlier this month, I was out of town two weekends in a row. The first to visit good friends that I don't get to see very often and the second for a math conference. Both trips were good. When I went back to the studio last week, I kind of wandered around a while before I figured out what it was I do there.
I finally got cranking on some soup mugs that I am making as a special order. Little things like centering and opening are the first to go for me if I am not practicing regularly. I managed to get some mugs done, but I wasn't really happy with them. I had difficulty getting them to match. It is amazing sometimes how I can take identically sized balls of clay and make mugs that vary so much in size and shape. I will admit that I didn't notice the differences so much this weekend when I sanded them to get them ready for the bisque fire. Maybe when they are fired and glazed, they will be ok. Then again, I may decide that I have to start over and try again to get a set that match.
I finally got cranking on some soup mugs that I am making as a special order. Little things like centering and opening are the first to go for me if I am not practicing regularly. I managed to get some mugs done, but I wasn't really happy with them. I had difficulty getting them to match. It is amazing sometimes how I can take identically sized balls of clay and make mugs that vary so much in size and shape. I will admit that I didn't notice the differences so much this weekend when I sanded them to get them ready for the bisque fire. Maybe when they are fired and glazed, they will be ok. Then again, I may decide that I have to start over and try again to get a set that match.
Lookie What I Bought!
This is a picture of the equipment that I just bought. I have my very own wheel and kiln now! They will live in my garage since I have no studio space at home and no immediate plans to create such a space. I have dreams for someday converting the barn into a studio, but that is a long way off. There are horses who live out there and they aren't ready to move out yet.
I wasn't really looking to make purchases like this right now, but the right opportunity presented itself. It is really funny how things work out sometimes. We can chalk this whole experience up to the power of the internet and social networking. It has been an amazing week and I am grateful to all the people who helped make this possible. BIG thanks are due to Jeff, Allen, Bob, Mom and Dad, and even Jose!
I wasn't really looking to make purchases like this right now, but the right opportunity presented itself. It is really funny how things work out sometimes. We can chalk this whole experience up to the power of the internet and social networking. It has been an amazing week and I am grateful to all the people who helped make this possible. BIG thanks are due to Jeff, Allen, Bob, Mom and Dad, and even Jose!
Monday, April 4, 2011
Glazing Day Part 2
I was out of town last weekend, so there's not a lot to tell as far as pottery goes. I did pick up the pieces that were fired the weekend before. I was quite pleased with most of them and only one piece needs to be re-fired. Pictures of some of the more interesting ones are on the right side of your screen.
Subscribe to:
Posts (Atom)



